part name material housing o ring 1 p s 1 sealed liquid compensation resistor board fitting 1 2 3 4 5 1 2 53 4 aluminum fluoro-rubber sus 316l ceramic silicone oil internal structure pa-830 (g 1/8) high corrosion resistance by double diaphragm structure built-in amplifier circuit 2 types to choose from (gauge and absolute pressures) incorporating temperature compensation function (0 ~ 50 c) voltage output mode available with a t vcr ? fitting features model number designation p a - 8 3 0 - 1 0 2 a - 0 5 series name rated pressure range 101 0 ~ 9.8 kpa {0 ~ 0.1 kgf/cm 2 } 351 0 ~ 34.3 kpa {0 ~ 0.35 kgf/cm 2 } 501 0 ~ 49.0 kpa {0 ~ 0.5 kgf/cm 2 } 102 0 ~ 98.1 kpa {0 ~ 1 kgf/cm 2 } 352 0 ~ 343 kpa {0 ~ 3.5 kgf/cm 2 } 103 0 ~ 981 kpa {0 ~ 10 kgf/cm 2 } thermal error/fitting 05 0.05 % f.s./c, g 1/8 10 0.1 % f.s./c, g 1/8 r2 0.05 % f.s./c, r 1/4 vcr 0.05 % f.s./c, vcr ? pressure reference g gauge a absolute v gauge (vacuum) t please refer to the list of model numbers when placing orders. t vcr ? is a registered trade name of cajon co. cajon ? is a registered trade name of swagelok co. note: for handling of vcr fittings, please contact a service center of swagelok co. pressure transducers with amp. pa-830
ripple content consumption current 10 % (p-p) 20 maximum ma maximum power supply voltage 12 ~ 24 10 % v dc not available t verify the above model numbers when placing orders. pressure reference gauge absolute 0 ~ 9.8 0 ~ 49.0 0 ~ 98.1 0 ~ 343 0 ~ 981 0 ~ ? 98.1 0 ~ 34.3 0 ~ 98.1 {0 ~ 0.1} {0 ~ 0.5} {0 ~ 1} {0 ~ 3.5} {0 ~ 10} {0 ~ ? 1} {0 ~ 0.35} {0 ~ 1} kpa {kgf/cm 2 } rated pressure range {% f.s./c} thermal error output voltage output 0.05 fitting g 1/8 fitting r 1/4 fitting vcr fitting g 1/8 0.10 list of model numbers pa-830 -501g-05 pa-830 -101g-10 pa-830 -501g-r2 pa-830 -102g-05 pa-830 -102g-r2 pa-830 -352g-05 pa-830 -352g-r2 pa-830 -103g-05 pa-830 -103g-r2 pa-830 -102v-05 pa-830 -102v-r2 pa-830 -351a-05 pa-830 -351a-r2 pa-830 -351a-vcr pa-830 -102a-05 pa-830 -102a-r2 pa-830 -102a-vcr pa-830 -102v-vcr pa-830 -103g-vcr pa-830 -352g-vcr pa-830 -102g-vcr pa-830 -501g-vcr pa-830 -351a-10 pa-830 -102a-10 pa-830 -102v-10 pa-830 -103g-10 pa-830 -352g-10 pa-830 -102g-10 pa-830 -501g-10 general specifications standard specifications item pressure reference rated pressure range maximum pressure break-down pressure operating temp. range compensated temp. range storage temp. operating humidity pressure medium insulation resistance dielectric strength sealed liquid pressure port net weight model number pa-830 101g 501g 102g 352g 103g 102v 351a 102a gauge absolute 9.8 49.0 98.1 343 981 ? 98.1 34.3 (abs) 98.1 (abs) {0.1} {0.5} {1} {3.5} {10} { ? 1} {0.35} {1} 19.6 98.1 196 686 1961 196 103 (abs) 196 (abs) {0.2} {1} {2} {7} {20} {2} {1.05} {2} 29.4 147 294 1030 2942 294 147 (abs) 294 (abs) {0.3} {1.5} {3} {10.5} {30} {3} {1.5} {3} corrosive gases/liquids compatible with sus 316l approx. 140 100 (500 v dc) 500 v ac, 60 s leakage current 1 ma maximum silicone oil g 1/8 (pf 1/8) z r 1/4 (pt 1/4) z 1/4 vcr ? yt 0 ~ 50 35 ~ 85 no condensation ? 20 ~ 70 atmospheric pressure, humidity 65 %rh maximum ? 20 ~ 70 kpa {kgf/cm 2 } kpa {kgf/cm 2 } kpa {kgf/cm 2 } c c %rh c m minimum g t y pa-830-vcr : also compatible with sus316. t y an o ring is provided for only g1/8 type. (positive pressure : p15, negative/absolute pressure : p12.5) t ? unless otherwise specified, the specs are defined at an ambient temperature of 255 c and excitation voltage of 12 v dc. pa-830 pressure transducers with amp.
pa-830 pressure transducers with amp. analog output thermal error 0 ~ 50 c (reference temp.: 25 c) output voltage zero voltage span voltage output current linearity/hysteresis supply voltage effect response gravitational effect (from vertical position to horizontal position) 1 ~ 5 1 0.04 (at 25 c) 4 0.04 (at 25 c) 1 load resistance 5 k minimum 0.5 0.3 0.5 0.3 0.5 approx. 2 approx. 1 approx. 0.5 approx. 0.3 approx. 0.1 approx. 0.05 approx. 0.3 approx. 0.5 approx. 0.3 0.05/ 0.1 yt 0.05/ 0.1 yt 0.1 zero %f.s./c %f.s. span %f.s./c v dc v v ma maximum v maximum ms %f.s. max. item model number pa-830 101g 501g 102g 352g 103g 102v 351a 102a environmental characteristics test item test conditions (at 25 5 c) permissible change vibration 10 ~ 500 hz, 1.5 mm maximum/98.1 m/s 2 , 3 directions for 2 hours each 490 m/s 2 , 3 directions for 3 times each 0 ~ rated pressure, 10 6 cycles 40 c, 90 ~ 95 %rh, 240 hrs. zero voltage, span voltage: 1 %f.s. maximum each shock pressure cycling moisture resistance t y the thermal error of the pa-830-101g will be 0.1 %f.s./c only. internal electrical schematics shield main circuit pressure sensor common output power b
22 pressure port m 5 depth 6 housing (aluminum with alumite finish) sn plate label part no. label g 1/8 (pf 1/8) (sus 316l) 12 8 22.5 551 (10) 8 30 4 C core shielded cable l = 1500 50 awg26 ulno.2844 ( 3.8) cable bush (ess-1) o ring groove depth 1.8 pa-830 pressure transducers with amp. g1/8 type r1/4 type outline dimensions unless otherwise specified, tolerance : 0.5 (unit: mm) 22 pressure port m 5 depth 6 13.5 8 23.5 561 (10) 8 30 (25.4) (sus 316l) 3 1 5 cable bush (ess-1) sn plate label part no. label 4 C core shielded cable l = 1500 50 awg26 ulno.2844 housing (aluminum with alumite finish) ( 3.8) wire color red white green black shield connection power b output n.c. common fitting pa-830 vcr type 19 1/4 vcr (sus 316) (16) 8.5 (26.5) 591 (10) 8 30 cable bush (ess-1) sn plate label part no. label housing (aluminum with alumite finish) 4 C core shielded cable l = 1500 50 awg26 ulno.2844 ( 3.8)
|